Recently a dead Dell XPS M1330 came across the workbench. The battery was dead and the machine fails to boot. After some effort at reviving the machine, it was declared hopeless and salvage operations began. Today’s effort focuses on the motherboard port for the AC power adapter.
The power plug on this Dell different from the typical Dell laptop AC adapter: octagonal in shape rather than round. The shape meant it could not be used on other Dell laptops designed for the round plug. However, the dimensions of the octagon are such that an AC power adapter with the typical round Dell plug fits and could be used to charge the laptop. So while the laptop could be charged with any existing Dell-compatible AC adapter, the AC adapter that came with this machine is specific to this Dell.
Once the XPS M1330 died, its octagonal plug power adapter is not useful for other Dell laptops. It still functions as a power supply transforming household AC to ~19V DC so it might be useful for future projects. To preserve this possibility, the octagonal power port will be recovered from the system board.
The solder used in Dell assembly was possibly one of the lead-free types and is definitely reluctant to melt and flow. Trying to desolder the power port using hand tools (desoldering wick and hand suction pump) had no luck. So this project was chosen as a practice run of using a dedicated desoldering tool, in this case a Hakko 808. The tip of this tool heats up to melt the solder, and with a press of the trigger an electric vacuum pump pulls the melted solder through center channel of the heated tip and into a chamber for later disposal.
The desoldering pump was able to remove more solder than hand tools could, but was still not quite enough to free the port. Using a soldering iron, some user-friendly leaded solder was worked back into the joints to mix with the remaining Dell factory solder. Upon second application of the electric desoldering tool, enough solder was removed to free the port from the system board with only minimal damage.
A test with the voltage meter confirmed this port is now ready to be used to provide ~19V DC power to a future project.